melting point
美 
英
词形变化
复数：melting points
英汉双解
1. | 熔点the temperature at which a substance will melt |
英汉解释
英英解释
例句
He forgot, however, to check the melting point of aluminum, and his rocket did not get off the ground.
但是，他忘了检查铝的熔点，结果他的火箭没有飞离地面。
The temperature at which melting occurs is called the melting point. The point at which boiling occurs is called the boiling point.
熔化发生时的温度称为熔点，发生沸腾时的温度称为沸点。
and a vacuum control system is connected with the heat preservation container for measuring the congruent melting point.
真空控制系统与测定共熔点的保温容器相连。
The semi-Solid Forming technique of low melting point alloy has been used in commercial production.
低熔点合金半固态成形技术被专家称为21世纪新兴的金属制造关键技术。
This paper introduced the the system of phase-changing material, and made a "phase change alloy" by the low melting point.
笔者主要介绍了相变储能材料的相变机理及分类，以及利用低共熔点原理制备一种新型的“相变合金”。
Pale yellow crystal with a strong musky odor. Widely used in cosmetics and soap perfumes. Melting point: 113Degrees min. Ingolublc in water.
本品为淡黄色结晶体，醛具有强烈的麝香香气，酮广泛用于化妆皂用香料，酚熔点113℃以上，醚不溶于水。
Pp low melting point, abrasive wear, friction of the surface layer of fluff fluff decline phenomenon may lead to irremediable.
丙纶熔点低，磨料磨损、绒毛表层的摩擦都可能造成不可补救的绒毛衰败现象。
Get according to the request the total melting point of strange mildewed vegetable, jelly stem curve, in order to produce a qualified drugs.
按照要求得到阿奇霉素的共熔点，冻干曲线，以便生产出合格的药品。
A part surface can be infiltrated with a low melting point metal to increase density, strength, hardness, ductility and impact resistance.
零件表面能被低熔点金属渗透以增大密度、强度、硬度、延展性和抗冲击能力。
You all know this. When you put something, like an impurity, a salt or sugar in the water, the melting point gets depressed. It goes down.
这个你们都知道，如果你放一些杂质，比如盐或者糖在水里面，熔点会下降，下降了。
Of high temperature and high pressure, low temperature, high melting point and other conditions are able to meet the requirements.
对高温、高压、低温、高熔点等各种工况均能满足要求。
It is mainly used for measuring the melting point of crystalline compounds, like drug, dye, and flavor, etc.
主要用于药物、染料、香料等晶体有机化合物熔点之测定。
Ionic liquids are organic salts consisted of only ions utterly, which are liquids with the melting point close to or below room temperature.
离子液体是指完全由离子组成的、在室温及邻近室温下呈液态的盐。
By measuring the melting point of the complex, the experimental value is close to the theoretical value.
通过熔点测定合成的配合物的纯度，实验值接近理论值。
and the hard coating is prepared from iron-based alloy powder with a low melting point and tungsten carbide or titanium carbide powder.
该硬质涂层由低熔点的铁基合金粉末与碳化钨或与碳化钛粉末制作而成。
Petroleum products - Determination of the conventional melting point of petroleum waxes and petroleum jellies.
石油产品.石油蜡和矿脂常规溶点的测定
A protective flux is generally best applied as a low melting point liquid, which can easily and efficiently cover the molten metal surface.
保护性熔剂一般最好以低熔点液体的形式使用，这使它易于有效地覆盖金属液表面。
The melting point of five standard samples(vanillin, etc) have been measured precisely by DSC and capillary tube, respectively.
本文用DSC法和毛细管法精确测量了香草醛等五种熔点标样的熔点。
bsp; point (glass transition temperature) and the melting point of a polymer will determine which it will be suitable for applications.
聚合物的软化点（玻璃状转化温度）和熔化点决定了它是否适合应用。
Increase of Cu concentration will generate an increase in melting point of the alloy and increase of viscosity of the solder.
铜浓度增加会导致合金的熔点提高，焊料的粘性提高。
Perhaps the outer part of the moon was heated to the melting point by intense meteoric bombardment.
也许月球外层曾被流星体猛烈的撞击而加热到熔点。
Controlling the water content could decrease the content of sodium ion and raise the melting point and improve the whiteness of the product.
控制反应水量，可达到降低产品中钠离子含量、提高产品熔点和产品白度的作用。
Glassware is a special glass with a low melting point and high plasticity. It is rich and colorful in the snuff bottle family.
料器是一种熔点较低且可塑性较强的玻璃，在烟壶种族中是最丰富多彩的一个品种。
DETERMINATION OF THE CONVENTIONAL MELTING POINT OF PETROLEUM JELLY, CRUDE PETROLEUM JELLY AND PETROLEUM WAX.
石油产品.矿脂、原矿脂和石油蜡常规焙点的测定
Melting point and decomposition temperature of thses germanic compounds have been determined by thermogravimetry.
由差热分析曲线测得了它们的熔点和分解温度。
Some optimum processing parameters about manufacturing the low melting point polyester can also be obtained.
以得到制备低熔点共聚酯的最佳配方等一些工艺参数。
Chemical products for industrial use. Determination of melting point. Method for the determination of cristallizing point (freezing point).
化工产品.熔点的测定.结晶点（冰点）的测定方法
This preform is then heated to a temperature just below the melting point of the alloy.
此时，将初步加工的成品加热到一定的温度，这个温度要刚刚低于合金的熔点。
However, the current development and application of aluminum and aluminum alloys are restricted by its processing and low melting point.
但由于加工成形困难和自身熔点低等问题，硬铝合金的连接受到限制。
The melting point of copper is not so high as that of iron.
铜的熔点不如铁高。
plastics . polyamide resins . determination of melting point . meniscus method.
塑料制品。聚酰胺树脂。熔点的测定。凹凸镜法。
As the content of BMA increases, the melting point, enthalpy of fusion, dynamic contact angle of copolymer rise.
梳形聚合物的熔点、焓值及静态接触角随着共聚物中BMA含量的升高而升高。
plastics . polyamide resins . determination of melting point . so - called capillary tube method.
塑料制品。聚酰胺树脂。熔点的测定。毛细管法。
Account should be taken of the low melting point of this substance.
应该考虑到这种物质熔点较低。
Emergency theory, being a new paradigm, has now been becoming the melting point and academic growth point among subjects of various kinds.
涌现论作为一种新的理论范式，现已成为各学科门类的连接点和新的学术增长点。
In sintering, ceramic powders are processed into compacted shapes and then heated to temperatures just below the melting point.
在烧结过程中，陶瓷粉末先挤压成型然后加热到略低于熔点温度。
Comparative analysis showed that both of such long inclusions are low melting point plastic oxide inclusions containing B2O3.
对比分析认为，这两类长条状夹杂物均为含B2O3的低熔点氧化物塑性夹杂。
Characteristics of low melting point alloy materials and dies of the alloys are described in the article.
介绍了低熔点合金材料及低熔点合金模具的特点。
The thixoforming is suitable for the controlling semi-solid forming of iron and steel with high melting point.
由于触变成形工艺本身的特点，使其更适宜于钢铁等高熔点材料的半固态成形控制。
The aim of the invention is to provide a polymerizable chiral compound which has strong HTP and low melting point.
本发明目的在于提供具有强HTP和低熔点的聚合性手性化合物。
It has the features of continuous reaction, short time, high melting point and stable quality.
用此工艺制取拔丝润滑剂具有反应持续、时间短、溶点高、质量稳定的特点。
